Ti3C2MXene load zinc
| 【Numbering】BK2021112602 | 【CAS】cas | ||
| 【Item No.】BK2021112602 | 【specification】 | ||
|
|||
Product introduction:
This product is a new type of current collector with mxene coating uniformly coated on the surface of aluminum foil. This product utilizes mxenes excellent conductivity and two-dimensional lamellar structure to form an ultra-thin coating (less than 1um in thickness) with excellent conductivity on the surface of the current collector, which can significantly reduce the interface resistance and improve the adhesion of active materials, thereby greatly Improve battery rate performance and cycle life. Its comprehensive performance is better than that of coated aluminum foil modified with ordinary carbon black and graphite, and it can replace traditional aluminum foil and corroded aluminum foil and be widely used in lithium-ion batteries and supercapacitors.
Specifications:
Product name: Ti3C2MXene loaded Zincfilm
Appearance: black gray coating
Coating single-sided thickness (typical value): 0.6um
Coating density on one side: 0.04~0.1/mg.cm(-2)
Product Features:
1. This product uses mxene as raw material to achieve ultra-thin coating.
2. It can significantly reduce the interface resistance, improve the lithium batterys rate, cycle and other electrochemical performance.
3. Improve the adhesion between the active material and the current collector, inhibit the corrosion of the current collector, and prolong the cycle life of the battery.
4. Reduce the polarization, reduce the thermal effect, restrain the heating during the charging process, and improve the safety of the battery.
Message
This product is a new type of current collector with mxene coating uniformly coated on the surface of aluminum foil. This product utilizes mxenes excellent conductivity and two-dimensional lamellar structure to form an ultra-thin coating (less than 1um in thickness) with excellent conductivity on the surface of the current collector, which can significantly reduce the interface resistance and improve the adhesion of active materials, thereby greatly Improve battery rate performance and cycle life. Its comprehensive performance is better than that of coated aluminum foil modified with ordinary carbon black and graphite, and it can replace traditional aluminum foil and corroded aluminum foil and be widely used in lithium-ion batteries and supercapacitors.
Specifications:
Product name: Ti3C2MXene loaded Zincfilm
Appearance: black gray coating
Coating single-sided thickness (typical value): 0.6um
Coating density on one side: 0.04~0.1/mg.cm(-2)
Product Features:
1. This product uses mxene as raw material to achieve ultra-thin coating.
2. It can significantly reduce the interface resistance, improve the lithium batterys rate, cycle and other electrochemical performance.
3. Improve the adhesion between the active material and the current collector, inhibit the corrosion of the current collector, and prolong the cycle life of the battery.
4. Reduce the polarization, reduce the thermal effect, restrain the heating during the charging process, and improve the safety of the battery.
Application areas: energy storage, catalysis, analytical chemistry, mechanics, adsorption, biology, microelectronics, sensors, etc.
| Warm tips: Suzhou Beike nano products are only used for scientific research, not for human body,different batches of products have different specifications and performance |
Message
|
| Warm tips: Suzhou Beike nano products are only used for scientific research, not for human body,different batches of products have different specifications and performance.The website pictures are from the Internet. The pictures are for reference only. Please take the real object as the standard. In case of infringement, please contact us to delete them immediately. |
Previous： the end...
Next： Porous monolayer MO2C
